Design3D Finished Work
Craft
3D Finished Pieces (11 categories)
The following information applies to ALL craft sections, please read this carefully.
Each Craft section is split into JUNIOR and SENIOR.
Entries in this section must be physical pieces. 3D renders will not be accepted.
Entries will be judged on technical ability and excellence of craft skills. However, and where appropriate, originality, creative interpretation and presentation will be taken into consideration.
Materials and methods of manufacture used must be specified i.e. hand, production, technological processes, CAD, RP, CNC, Laser sintering etc.
If several specialist craftspeople for different sections enter an item, these details need to be submitted on the entry form where indicated.
Where relevant, articles entered must be in a finished condition. Entrants are encouraged to submit in precious metals wherever possible and such entries must conform to hallmarking legislation if applicable.
Work entered in these sections can also be entered in any of the relevant Design sections & we strongly encourage entrants to do so.
Silversmiths (Craft)
Sponsored by Grant Macdonald Silversmiths
The silversmiths craft section welcomes entries of larger-scale work, functional and/or decorative objects.
Tableware, vessels, bowls, and centrepieces are examples of finished objects that can be entered into this section, to be appraised on their craftsmanship.
Image: Caitlin Murphy - Convex Cube, Gold & The Grand Macdonald Silversmiths Award (Junior)
Requirements
Judges will be looking for:
Technical achievement
Degree of skills demonstrated
Balance and consistency of form
A consistent finish of exterior and interior surfaces
Work Experience
Subject to Grant Macdonald’s consideration, the winning entrant/s could be offered a period of workshop experience.
Polishers
The craft of polishing, by hand and/or mechanical means, is to achieve a highly reflective and smooth surface/s.
The polishers section seeks to identify and reward high-quality finishing in any item of 3D jewellery, silverware or smallwork created in metal.
Image: Paul Bailey-Green - Night & Day, Gold Award (Senior)
Requirements
Judges will be looking for:
Appropriate surface finishing to enhance the final piece
Quality and effectiveness of different surface finishes and contrasts, where appropriate
Quality of finishing on exterior and interior surfaces
Chasers
Sponsored by The Birmingham Assay Office
Chasing is a traditional embossing technique used to create form, relief and decoration by pushing metal back and making a design protrude forward. This is also in conjunction with repoussé (‘push up’) by hammering on the reverse side of the metal to bring it forward to produce three dimensional patterns and effects on metal surfaces.
This section identifies and rewards high-quality chasing in any item of 3D silverware, objet d’art, smallwork or jewellery created in metal.
Any chased article may be submitted using hand chasing and/or repoussé techniques from sheet metal.
Image: Charlie Lewis - Grape & Vine Cup, Gold & The Birmingham Assay Office Award (Junior)
Requirements
Judges will be looking for:
Technical achievement
Degree of skills demonstrated
Quality and effectiveness of chasing
3D creative interpretation
Work that demonstrates exploration and experimentation.
Smallworkers & Modelmakers
Sponsored by Cleave & Company
Smallwork and Modelmaking covers the production and manufacture of pieces of objet d’art made in metals and often have precision, detail and scale.
We are delighted to be partnering with Cleave & Company who are sponsoring this section. Smallwork incorporates boxes, containers, accessories, objet d’art, and timepieces, and scale models. They can include an intricate mechanism, hidden features, or a highly decorative surfaces.
Pieces can also be more functional and composed of several parts that make up the final article. However, they can have no function at all and be purely decorative.
Image: Sophie Champan - 1:18 Model of a Nissan Figaro, Gold & The Ottewill Silversmiths and Jewellers Award (Junior)
Requirements
Judges will be looking for:
Accurate fitting of parts with fine tolerances, complexity of the piece and working to scale
Quality of construction and soldering
Where appropriate the inclusion of chenier, flush and book joints
Control of flat surfaces and parts that are attached by soldering
Where appropriate the use of non-permanent joining of parts by screw threads or bolts and nuts
Work experience
Subject to Ottewill’s consideration, the winning entrant could be offered a period of workshop experience.
Modellers
Sponsored by Cookson Precious Metals
Modelling is the art of sculpting objects, figures, animals, flora etc. from a variety of materials.
We are delighted to be partnering with Cookson Precious Metals who are sponsoring this section. Any sculpted subject, including medals, may be submitted in any media e.g. wax, plastics, wood, plaster etc. Entries can be created using hand and/or technological techniques.
Entries in this section should be castable or be possible to take a mould from the entry for reproduction using casting techniques.
With any finished work, you must list all processes undertaken following the modelling stage up to completion i.e. chasing, filing, carving, polishing etc.
Image: Richard Chown - Benin Mask, Gold & The Cookson Precious Metals Award - Modellers (Senior)
Requirements
Judges will be looking for:
Quality of modelling skills
Scale, proportion and artistry
Creative interpretation
Work that demonstrates exploration and experimentation
Jewellers
Sponsored by Brown & Newirth
The jewellers section, sponsored by Principal Patron Brown & Newirth, is designed to identify and reward high quality skills demonstrated in fine jewellery.
Entries normally include precious metals in any colour or combination but they can be in base metals.
Jewellery can contain semi and/or precious gemstones and/or decorative techniques such as enamelling and engraving.
Image: Amy Gibson - Hummingbird Collar Necklace, Gold Award &
The Brown & Newirth Award (Junior)
Requirements
Judges will be looking for:
Complexity of the piece of work
Quality of construction and soldering
Degree of skills demonstrated
Creative interpretation
If CAD/CAM, rapid prototyping, and/or 3D printing are used, you must state which processes you have used and the extent to which this has been utilised.
Materials and methods of manufacture must be specified, e.g. hand, production, any technological processes, etc.
Diamond Mounters
Diamond mounting is the framework/mount in which diamonds or gemstones can be set.
Entries will be judged on hand-skills, and not CAD produced pieces or parts thereof.
Pieces should preferably be unset and where possible, unpolished (areas that require pre-polishing prior to construction is acceptable).
Image: Thomas Carl-Johnson - The Orchid Necklace, Silver Award (Senior)
Requirements
Judges are looking for:
Complexity of the piece
The demonstration of hand piercing, particularly back holes (A jour) pierced motifs, and fretwork
Quality of construction and soldering
The inclusion of edging, gallery work, symmetry, devices i.e. Clasps, catches, articulation and En tremblant
A consistent finish of all surfaces to a pre-polished stage (minimum 1000 grit) or pumice grade.
Setters
Setting is the process of securing precious and semi-precious gemstones into various items of jewellery, smallwork, silverware and accessories, using a range of setting and carving techniques.
The Judges welcome all setting entries, they prefer is to see a good variety of different setting techniques (e.g.3) but this isn’t a mandatory requirement.
Image: Reuben Veil-Powley - Inverted Pyramid Set Ring, Gold Award (Junior)
Requirements
Judges will be looking for:
Rub-over edges that are uniformly in contact with the stone without gaps, and inside edges cut-back with a clean bright cut
Stone spacing to be even with the tables level with each other, grooves on the inside of claw settings to match the stone girdle
Micro setting with uniform spacing, level tables and bright cutting is symmetrical, and any decorative cuts or threads are also aligned and symmetrical.
Enamellers & Enamel Painters
This section encourages and promotes the craft skills of traditional enamelling (powdered glass fused to metal at high heat) in any or a combination of the disciplined techniques e.g. champlevé, cloisonné, plique a jour.
This section is open to any enamelled or enamel painted item of jewellery or related article of silversmithing, smallwork or objet d’art that uses traditional enamelling techniques on metal.
Where applicable, if entries contain elements of engraved work, they are also encouraged also enter their work in the craft section Engravers.
Entrants to the enamelling sections — both craft and design — are also encouraged to consider applying for the Phil Barnes Enamelling Bursary as a part of their entry. Please see below for further details.
Image: Penny Davies - Set of Enamel Portraits, Gold Award (Senior)
Requirements
Judges will be looking for:
Technical ability and excellence of enamelling craft skills
Degree of difficulty/complexity
Quality and effectiveness of finishing
Originality of the design / motifs
Creativity in the application of enamel
Lapidary & Carving
Sponsored by C W Sellors
Lapidary is the art of cutting, carving and polishing gem material in shaping stone, minerals or gemstones into decorative items.
We are delighted to be partnering with Named Award Patrons C W Sellors to promote the art and potential of Lapidary and gemstone carving.
The brief encourages you to submit individual pieces of lapidary in your chosen gem material. Any style of cutting, carving and finishing may be used including precious or non-precious gem material. This is an opportunity to demonstrate technical excellence, creativity and an innovative approach to lapidary.
The material, method and style of cutting used must be specified within your online application. If CNC milling was used then the entrant must have milled and finished the material by themselves with minimal technical assistance.
C. W. Sellors are offering any entrant an authentic piece of Whitby Jet to cut or carve for submitting into the competition, please contact: martynw@cwsellors.com
Image: Vicky Forrester - Dyad , Agate Vessel & Native Gold Ring, Gold & The C W Sellors Fine Jewellery Award (Senior)
Requirements
Judges will be looking for:
Technical excellence
Innovative use of gem material
Creativity which enhances the inherent qualities of chosen material and process
Engravers, Die Sinkers & Seal Engravers
Engraving and seal engraving is the art and craft of cutting and carving onto any metal surfaces to create decorative imagery such as lettering, pictures, textures etc. Seal engraving involves reverse deep cutting to produce a positive 3D impression.
This section is open to any article of jewellery, silversmithing, objet d’art or smallwork that features decorative hand engraving, as well as seal engraving or dies.
Copper-plate engraving should be accompanied with a sample of the print. All dies and seals should be accompanied with an impression.
Image: Celeste Heathcote - Ish Wish Dish, Gold Award (Junior)
Requirements
Judges will be looking for:
Quality and effectiveness of hand cutting on lettering and pictorial work
Technical and artistic excellence of engraving, seal engraving or die sinking skills
Understanding of cutting to give true representation i.e. light, fabric, depth, breadth, relief. Fine shading & cross hatching
Design originality and creativity
At least 2 styles of lettering and to be threaded out
14 Jan 2025
Online Entry Form submission deadline
14 - 16 Jan 2025
Entry submission @ The Goldsmiths’ Centre, EC1M 5AD
3rd Mar 2025
Awards Ceremony @ The Goldsmiths' Hall, EC2V 6BN
4 - 7 Mar 2025
Awards Exhibition @ The Goldsmiths' Hall, EC2V 6BN
13 - 14 Mar 2025
Entry collection days @ The Goldsmiths’ Centre, EC1M 5AD
